V-Tec AT16/C5 Spécifications Page 70

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 94
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 69
Si2400
70 Rev. 1.3
Reset settings = 0000_0000
b
(0x00)
Reset settings = 0000_0000
b
(0x00)
SE6 (DSP3). (SE8 = 0x02) Write Only Definition
BitD7D6D5D4D3D2D1D0
Name
CPSQ CPCD USEN2 USEN1 V23E ANSE DTMFE
Type WW WWWWW
Bit Name Function
7 CPSQ 0 = Disable.
1 = Enables a squaring function on the output of filter B before the input to A (cascade
only).
6CPCD
0 = Call progress filter B output is input into call progress filter A. Output from fil-
ter A is used in the detector.
1 = Cascade disabled. Two independent fourth order filters available (A and B). The
largest output of the two is used in the detector.
5 Reserved
4USEN2
0 = Disable.
1 = Enable the reporting of user defined frequency tones 3 and 4 through TONE.
3USEN1
0 = Disable.
1 = Enable the reporting of user defined frequency tones 1 and 2.
2V23E
0 = Disable.
1 = Enable the reporting of V.23 tones, 390 Hz and 1300 Hz.
1ANSE
0 = Disable.
1 = Enable the reporting of answer tones.
0 DTMFE
0 = Disable.
1 = Enable the reporting of DTMF tones.
SEB (TPD). Timer and Power Down
BitD7D6D5D4D3D2D1D0
Name
PDDE
Type R/W
Bit Name Function
7:4 Reserved Read returns zero.
3 PDDE
Power Down DSP Engine.
0=Power on
1 = Power down
2:0 Reserved Read returns zero.
Vue de la page 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 93 94

Commentaires sur ces manuels

Pas de commentaire